European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          SK Maschinen-Service GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe SKODA SIU 315


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80468 · Center Lathe

          SKODA - SIU 315 - - 1973/2008 - CNC Siemens 840D

          Technical details
          turning diameter over bed 3.150 mm︱turning diameter over slide rest 2.650 mm︱turning length 15.000 mm︱Control CNC Siemens 840D ︱workpiece weight 160 t︱number of spindle speeds 4 Bereiche – von 0,25 bis
          Pictures from location. Machine is now in warehouse in dismantled condition. See last picture. 8 steadies
            turning diameter over bed 3.150 mm
            turning diameter over slide rest 2.650 mm
            turning length 15.000 mm
            Control CNC Siemens 840D
            workpiece weight 160 t
            number of spindle speeds 4 Bereiche – von 0,25 bis
            Description :
            Pictures from location. Machine is now in warehouse in dismantled condition.
            See last picture.

            8 steadies
          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe RAVENSBURG KV 2 - 1000 CNC


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-90349 · CNC Lathe

          RAVENSBURG - KV 2 - 1000 CNC - - 1986 - Siemens 8 T

          Technical details
          turning diameter 1400 mm︱turning length 6000 mm︱control Siemens 8 T ︱turning diameter over bed slide 1000 mm︱centre height 800 mm︱workpiece weight flying clamped 4500 Kg︱max. workpiece weight between centres 20000 kg︱workpiece weight with 2 steadies 30000 kg︱faceplate diameter 1300 mm︱faceplate turning speed range 1,4-400 U/min︱drive capacity - spindle motor 112 kW︱max. torque on the faceplate 40.000 Nm︱z-axis 6500 mm︱x-axis 700 mm︱feeds x-axis 0,05-50 mm/min︱feeds z-axis 0,05-50 mm/min︱rapid speed 6000 mm/min︱feed power in the axis x + z 35.000 N︱tailstock - quill dia 250 mm︱quill stroke 260 mm︱
            turning diameter 1400 mm
            turning length 6000 mm
            control Siemens 8 T
            turning diameter over bed slide 1000 mm
            centre height 800 mm
            workpiece weight flying clamped 4500 Kg
            max. workpiece weight between ce. 20000 kg
            workpiece weight with 2 steadies 30000 kg
            faceplate diameter 1300 mm
            faceplate turning speed range 1,4-400 U/min
            drive capacity - spindle motor 112 kW
            max. torque on the faceplate 40.000 Nm
            z-axis 6500 mm
            x-axis 700 mm
            feeds x-axis 0,05-50 mm/min
            feeds z-axis 0,05-50 mm/min
            rapid speed 6000 mm/min
            feed power in the axis x + z 35.000 N
            tailstock - quill dia 250 mm
            quill stroke 260 mm
          Datasheet
          Request / Contact

          Heavy Duty Lathe

          used  Heavy Duty Lathe SKODA SRM 100


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20976 · Heavy Duty Lathe

          SKODA - SRM 100 - - 1975 -

          Technical details
          turning diameter over bed 1000 mm︱turning diameter over slide rest 710 mm︱turning length 7000 mm︱max. workpiece weight between centres 10000 kg︱spindle turning speed range 1,8-400 U/min︱tailstock quill taper metric 80/1:10 ︱tailstock - quill dia 170 mm︱tailstock - travel of quill 200 mm︱Tailstock quill travel speed 2150 mm/min︱main drive motor 37 kW︱longitudinal feeds: 0,125-48 mm/U ︱face feeds 0,4 der Längsvorschübe ︱weight of the machine ca. 17 t︱dimensions of the machine ca. 11x1,9x2 m︱
          machine was mechanically and electrically overhauled in the last years. - taper turning function - 3 lynettes - misc. center points for tailstock - set of change gears
            turning diameter over bed 1000 mm
            turning diameter over slide rest 710 mm
            turning length 7000 mm
            max. workpiece weight between ce. 10000 kg
            spindle turning speed range 1,8-400 U/min
            tailstock quill taper metric 80/1:10
            tailstock - quill dia 170 mm
            tailstock - travel of quill 200 mm
            Tailstock quill travel speed 2150 mm/min
            main drive motor 37 kW
            longitudinal feeds: 0,125-48 mm/U
            face feeds 0,4 der Längsvorschübe
            weight of the machine ca. 17 t
            dimensions of the machine ca. 11x1,9x2 m
            Description :
            machine was mechanically and electrically overhauled in the last years.

            - taper turning function
            - 3 lynettes
            - misc. center points for tailstock
            - set of change gears
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled SEIGER SLZ800 / 1500


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20957 · Lathe - cycle-controlled

          SEIGER - SLZ800 / 1500 - - 2006 - SIEMENS SINUMERIK 810 Dpl

          Technical details
          turning diameter 800 mm︱turning length 1500 mm︱control SIEMENS SINUMERIK 810 Dpl ︱workpiece weight flying clamped 750 ︱workpiece weight with one steady 2200 kg︱swing diameter over face slide 540 mm︱power capacity 20/28 kW︱spindle bore 83 mm︱weight of the machine ca. 6 t︱dimensions of the machine ca. 3,5x2,8x2 m︱
          gearbox must be checked!! machine without tailstock! -without tools -without jaws
            turning diameter 800 mm
            turning length 1500 mm
            control SIEMENS SINUMERIK 810 Dpl
            workpiece weight flying clamped 750
            workpiece weight with one steady 2200 kg
            swing diameter over face slide 540 mm
            power capacity 20/28 kW
            spindle bore 83 mm
            weight of the machine ca. 6 t
            dimensions of the machine ca. 3,5x2,8x2 m
            Description :
            gearbox must be checked!!
            machine without tailstock!
            -without tools
            -without jaws
          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine EMAG VL5


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20974 · Vertical Turning Machine

          EMAG - VL5 - - 2001 - FANUC 18 i-T

          Technical details
          chucking diameter 250 mm︱swing diameter 260 mm︱travel -x axis 570 mm︱travel -z axis 200 mm︱control FANUC 18 i-T ︱Turning speeds mainspindle 4500 U/min︱numbers of positions in the tool changer 12 ︱Dimensions (L x W x H) 3.700 x 1.500 x 2.400 mm︱weight of the machine 6.500 kg︱main drive motor 15 kW︱turret 12 station VDI 40
          machine is equipped with a closed standard autom. loader: for 12 workpieces 80 mm-220 mm for 14 workpieces 30 mm-160 mm for 28 workpieces 30 mm-85 mm max. total load 120 kg
            chucking diameter 250 mm
            swing diameter 260 mm
            travel -x axis 570 mm
            travel -z axis 200 mm
            control FANUC 18 i-T
            Turning speeds mainspindle 4500 U/min
            numbers of positions in the tool. 12
            Dimensions (L x W x H) 3.700 x 1.500 x 2.400 mm
            weight of the machine 6.500 kg
            main drive motor 15 kW
            turret 12 station VDI 40
            Description :
            machine is equipped with a closed standard autom. loader:
            for 12 workpieces 80 mm-220 mm
            for 14 workpieces 30 mm-160 mm
            for 28 workpieces 30 mm-85 mm
            max. total load 120 kg
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column DÖRRIES CTE 320/3400


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20435 · Vertical Turret Lathe - Single Column

          DÖRRIES - CTE 320/3400 - - 1981 - Siemens 8 T

          Technical details
          faceplate diameter 3200 mm︱swing diameter 5100 mm︱turning height 2505 mm︱cross rail - adjustment 1500 mm︱max. ram stroke 1250 mm︱slide adjustment 2000 mm︱control Siemens 8 T ︱tool changer 16 STK ︱table load 60 t︱faceplate turning speed range -stepless- 0,8-100 U/min︱feed 0,0 1-1000 mm/min︱rapid traverse 6000 mm/min︱drive of main spindle 75 kW︱weight of the machine ca. 70 t︱dimensions of the machine ca. 9,3 x 6,1 x 6,0 m︱
          machine is in an excellent condition!! with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.
            faceplate diameter 3200 mm
            swing diameter 5100 mm
            turning height 2505 mm
            cross rail - adjustment 1500 mm
            max. ram stroke 1250 mm
            slide adjustment 2000 mm
            control Siemens 8 T
            tool changer 16 STK
            table load 60 t
            faceplate turning speed range -s. 0,8-100 U/min
            feed 0,0 1-1000 mm/min
            rapid traverse 6000 mm/min
            drive of main spindle 75 kW
            weight of the machine ca. 70 t
            dimensions of the machine ca. 9,3 x 6,1 x 6,0 m
            Description :
            machine is in an excellent condition!!
            with div. acessories (photos available)

            machine can be equipped with latest electrics and Siemens CNC control SINUMERIK
            840D sl for additional costs.
          Datasheet
          Request / Contact

          Flange Drilling Machine

          used  Flange Drilling Machine GSP PVU


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80360 · Flange Drilling Machine

          GSP - PVU - - 1996 - Heidenhain TNC 426

          Technical details
          bore capacity in steel (diameter) 50 mm︱max. pitch circle 4300 mm︱number of spindles 1 ︱Control Heidenhain TNC 426 ︱min. dia. 2100 mm︱table diameter 4500 mm︱z-axis 250 mm︱weight of the machine ca. 22 t︱dimensions of the machine ca. 6 x 6 x 4 m︱
          - CNC-control Heidenhain - internal cooling distance between table and spindle 630mm boring stroke 380mm
            bore capacity in steel (diameter. 50 mm
            max. pitch circle 4300 mm
            number of spindles 1
            Control Heidenhain TNC 426
            min. dia. 2100 mm
            table diameter 4500 mm
            z-axis 250 mm
            weight of the machine ca. 22 t
            dimensions of the machine ca. 6 x 6 x 4 m
            Description :
            - CNC-control Heidenhain
            - internal cooling

            distance between table and spindle 630mm
            boring stroke 380mm
          Datasheet
          Request / Contact

          Jig Boring Machine

          used  Jig Boring Machine HAUSER-SIP MP 52 DR


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80385 · Jig Boring Machine

          HAUSER-SIP - MP 52 DR - - 1983 -

          Technical details
          spindle diameter 110 mm︱x-travel 900 mm︱y-travel 600 mm︱cross rail adjustment - vertical 635 mm︱quill travel 200 mm︱column daylight 950 mm︱max. distance between table and spindle-nose 15 - 850 mm︱table surface area 1020 x 860 mm︱table load 800 kg︱speeds 10 - 2500 U/min︱adjustment speed 5 - 2500 mm/min︱tool taper ISO 40 ︱electrics - voltage/frequency 380/50 V/Hz︱total power requirement 8 kW︱weight of the machine ca. 7 t︱dimensions of the machine ca. 4,9 x 2,9 x 3 m︱
          - 2 axis digital-readout ELESTA - with misc. tool holders
            spindle diameter 110 mm
            x-travel 900 mm
            y-travel 600 mm
            cross rail adjustment - vertical 635 mm
            quill travel 200 mm
            column daylight 950 mm
            max. distance between table and . 15 - 850 mm
            table surface area 1020 x 860 mm
            table load 800 kg
            speeds 10 - 2500 U/min
            adjustment speed 5 - 2500 mm/min
            tool taper ISO 40
            electrics - voltage/frequency 380/50 V/Hz
            total power requirement 8 kW
            weight of the machine ca. 7 t
            dimensions of the machine ca. 4,9 x 2,9 x 3 m
            Description :
            - 2 axis digital-readout ELESTA
            - with misc. tool holders


          Datasheet
          Request / Contact

          Radial Drilling Machine

          used  Radial Drilling Machine KOLB NKH 55


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20584 · Radial Drilling Machine

          KOLB - NKH 55 - - ca. 1960 -

          Technical details
          bore capacity in steel (diameter) 55,0 mm︱arm length 1750 mm︱workpiece height max. 1630 mm︱turning speeds 19 - 1320 U/min︱bore spindles - Morse Taper 5 MK︱engine output 5,5 kW︱weight 5 t︱range L-W-H 2,4 x 1,0 x 3,55 mm︱feed movement 475 mm︱floor plate size: 1650x1000 mm︱feeds 0,07-2,9 mm/U︱
            bore capacity in steel (diameter. 55,0 mm
            arm length 1750 mm
            workpiece height max. 1630 mm
            turning speeds 19 - 1320 U/min
            bore spindles - Morse Taper 5 MK
            engine output 5,5 kW
            weight 5 t
            range L-W-H 2,4 x 1,0 x 3,55 mm
            feed movement 475 mm
            floor plate size: 1650x1000 mm
            feeds 0,07-2,9 mm/U
          Datasheet
          Request / Contact
          used  Radial Drilling Machine KOLB HKH 50/1250


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20450 · Radial Drilling Machine

          KOLB - HKH 50/1250 - - 1972 -

          Technical details
          bore capacity in steel (diameter) 50,0 mm︱arm length 1.350 mm︱workpiece height max. 1630 mm︱turning speeds 19 - 1320 U/min︱bore spindles - Morse Taper 5 MK︱engine output 5,5 kW︱weight 5 t︱range L-W-H 2,4 x 1,0 x 3,55 mm︱feed movement 475 mm︱floor plate size: 1650x1000 mm︱feeds 0,07-2,9 mm/U︱
            bore capacity in steel (diameter. 50,0 mm
            arm length 1.350 mm
            workpiece height max. 1630 mm
            turning speeds 19 - 1320 U/min
            bore spindles - Morse Taper 5 MK
            engine output 5,5 kW
            weight 5 t
            range L-W-H 2,4 x 1,0 x 3,55 mm
            feed movement 475 mm
            floor plate size: 1650x1000 mm
            feeds 0,07-2,9 mm/U
            Description :

          Datasheet
          Request / Contact

          Ram-Type Floor Boring and Milling M/C

          used  Ram-Type Floor Boring and Milling M/C SCHARMANN Heavycut 3.3 / TDV 6


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20977 · Ram-Type Floor Boring and Milling M/C

          SCHARMANN - Heavycut 3.3 / TDV 6 - - 1989/2012 -

          Technical details
          spindle diameter 180 mm︱x-travel 5000 mm︱y-travel 3000 mm︱bore spindle stroke 1000 mm︱ram stroke 1000 mm︱dimension of the ram 425 x 425 mm︱spindle taper ISO 50 ︱spindle turning speed - stepless 3 - 1600 U/min︱feed stepless 0 - 10000 mm/min︱table surface area 3500 x 2500 mm︱table rotating 360 °︱table load 50 t︱power capacity 90 kW︱rapid traverse 10 m/min︱table travel 2500 mm︱table height 1450 mm︱weight of the machine ca. 125 t︱dimensions of the machine ca. 11x12x6,3 m︱
          + completely electrically overhauled with new motors in 2012 and equipped with a new control Heidenhain iTNC 530! + NC-turn table 3500 x 2500 mm - 50 to cap. + ATC 60-fold + Cooling unit with internal cooling + chip conveyor + angle clamping plate 2400x1700x1200 mm +++++ mecahincally and electrically in top condition! +++++
            spindle diameter 180 mm
            x-travel 5000 mm
            y-travel 3000 mm
            bore spindle stroke 1000 mm
            ram stroke 1000 mm
            dimension of the ram 425 x 425 mm
            spindle taper ISO 50
            spindle turning speed - stepless 3 - 1600 U/min
            feed stepless 0 - 10000 mm/min
            table surface area 3500 x 2500 mm
            table rotating 360 °
            table load 50 t
            power capacity 90 kW
            rapid traverse 10 m/min
            table travel 2500 mm
            table height 1450 mm
            weight of the machine ca. 125 t
            dimensions of the machine ca. 11x12x6,3 m
            Description :
            + completely electrically overhauled with new motors in 2012 and equipped with
            a new control Heidenhain iTNC 530!
            + NC-turn table 3500 x 2500 mm - 50 to cap.
            + ATC 60-fold
            + Cooling unit with internal cooling
            + chip conveyor
            + angle clamping plate 2400x1700x1200 mm
            +++++ mecahincally and electrically in top condition! +++++
          Datasheet
          Request / Contact
          used  Ram-Type Floor Boring and Milling M/C SKODA W 200 HC


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80470 · Ram-Type Floor Boring and Milling M/C

          SKODA - W 200 HC - - 1989 -

          Technical details
          spindle diameter 200 mm︱x-travel 11.000 mm︱y-travel 4.000 mm︱z-travel 1.600 mm︱w-Weg 400 mm︱dimension of the ram 520 x 520 mm︱tool taper ISO 60 ︱turning speed range 0,8 - 800 U/min︱torque 35.000 Nm︱bore feed range 0,75 - 3000 mm/min︱milling feed range 0,75 - 6000 mm/min︱ 3.000 mm/min︱rapid travel 6.000 mm/min︱electrics - voltage/frequency 380 / 50 V/Hz︱total power requirement 180 kW︱weight of the machine ca. 181 t︱dimensions of the machine ca. ca. 16 x 6 x 9,3 m︱rotary table SKODA E 25
          SKODA boring table E 25 clamping area 2.000 x 2.000 mm long. movement V-axis 1.200 mm DRO Heidenhain Positip floor plates consisting of 6 plates'a 5500 x 1850 x 350 mm (61,05 m²) 2 angular milling heads
            spindle diameter 200 mm
            x-travel 11.000 mm
            y-travel 4.000 mm
            z-travel 1.600 mm
            w-Weg 400 mm
            dimension of the ram 520 x 520 mm
            tool taper ISO 60
            turning speed range 0,8 - 800 U/min
            torque 35.000 Nm
            bore feed range 0,75 - 3000 mm/min
            milling feed range 0,75 - 6000 mm/min
            3.000 mm/min
            rapid travel 6.000 mm/min
            electrics - voltage/frequency 380 / 50 V/Hz
            total power requirement 180 kW
            weight of the machine ca. 181 t
            dimensions of the machine ca. ca. 16 x 6 x 9,3 m
            rotary table SKODA E 25
            Description :
            SKODA boring table E 25
            clamping area 2.000 x 2.000 mm
            long. movement V-axis 1.200 mm
            DRO Heidenhain Positip
            floor plates consisting of 6 plates'a 5500 x 1850 x 350 mm (61,05 m²)
            2 angular milling heads



          Datasheet
          Request / Contact

          Table Type Boring and Milling Machine

          used  Table Type Boring and Milling Machine TOS WHN 13 CNC


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80478 · Table Type Boring and Milling Machine

          TOS - WHN 13 CNC - - 1991 -

          Technical details
          spindle diameter 130 mm︱x-travel 3.500 mm︱y-travel 2.000 mm︱z-axis 1.250 mm︱w-axis 800 mm︱table-size 1.800 x 1.600 mm︱table load 12 t︱spindle taper ISO 50 ︱spindle motor 37 kW︱spindle turning speed range 1500 U/min︱rapid travel x/y/z 8 mm/min︱electrics - voltage/frequency 380 / 50 V/Hz︱weight of the machine ca. 35 t︱dimensions of the machine ca. 8,5 x 8,0 x 4,5 m︱
          control, motors and drive plate are renewed Fagor 8055 MC Power
            spindle diameter 130 mm
            x-travel 3.500 mm
            y-travel 2.000 mm
            z-axis 1.250 mm
            w-axis 800 mm
            table-size 1.800 x 1.600 mm
            table load 12 t
            spindle taper ISO 50
            spindle motor 37 kW
            spindle turning speed range 1500 U/min
            rapid travel x/y/z 8 mm/min
            electrics - voltage/frequency 380 / 50 V/Hz
            weight of the machine ca. 35 t
            dimensions of the machine ca. 8,5 x 8,0 x 4,5 m
            Description :
            control, motors and drive plate are renewed
            Fagor 8055 MC Power

          Datasheet
          Request / Contact
          used  Table Type Boring and Milling Machine TOS WHN 13 CNC


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-90335 · Table Type Boring and Milling Machine

          TOS - WHN 13 CNC - - 1991 -

          Technical details
          spindle diameter 130 mm︱x-travel 3500 mm︱y-travel 2000 mm︱z-axis 1250 mm︱w-axis 800 mm︱b-axis 360 °︱output 85 KVA︱table-size 1800x1800 mm︱table load 12 t︱table rotation 360x0,0001 °︱spindle taper ISO 50 ︱spindle motor 37 kW︱spindle turning speed range 1500 U/min︱feed range 4-8000 mm/min︱electrics - voltage/frequency 400 / 50 V/Hz︱weight of the machine ca. 35 t︱dimensions of the machine ca. 7x7x6 m︱
          control, motors and drive plate are renewed Fagor 8055 MC Power
            spindle diameter 130 mm
            x-travel 3500 mm
            y-travel 2000 mm
            z-axis 1250 mm
            w-axis 800 mm
            b-axis 360 °
            output 85 KVA
            table-size 1800x1800 mm
            table load 12 t
            table rotation 360x0,0001 °
            spindle taper ISO 50
            spindle motor 37 kW
            spindle turning speed range 1500 U/min
            feed range 4-8000 mm/min
            electrics - voltage/frequency 400 / 50 V/Hz
            weight of the machine ca. 35 t
            dimensions of the machine ca. 7x7x6 m
            Description :
            control, motors and drive plate are renewed
            Fagor 8055 MC Power

          Datasheet
          Request / Contact

          Lateral Milling Machine

          used  Lateral Milling Machine CME FCM-G-10000-CNC


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80484 · Lateral Milling Machine

          CME - FCM-G-10000-CNC - - 2001 - Heidenhain TNC 430

          Technical details
          x-travel 10.000 mm︱y-travel 1.500 mm︱z-travel 3.600 mm︱Control Heidenhain TNC 430 ︱operating platform: vertical stroke 2.000 mm︱floor plates 10.000 x 3.000 mm︱rapid travel x/y/z 10.000 mm/min︱spindle drive 30 kW︱spindle speed: 2.500 U/min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 16.070 x 6.280 x 8.210 m︱
          2-axis universal milling head permanently attached B axis: vertical swivel plane, hirth toothed 1° C-axis: swivel plane 45°, hirth toothed 2.5° tool taper ISO 50 internal coolant supply automatic tool changer, magazine with 60 dots
            x-travel 10.000 mm
            y-travel 1.500 mm
            z-travel 3.600 mm
            Control Heidenhain TNC 430
            operating platform: vertical st. 2.000 mm
            floor plates 10.000 x 3.000 mm
            rapid travel x/y/z 10.000 mm/min
            spindle drive 30 kW
            spindle speed: 2.500 U/min
            dimensions of the machine ca. 16.070 x 6.280 x 8.210 m
            Description :
            2-axis universal milling head permanently attached
            B axis: vertical swivel plane, hirth toothed 1°
            C-axis: swivel plane 45°, hirth toothed 2.5°
            tool taper ISO 50
            internal coolant supply
            automatic tool changer, magazine with 60 dots
          Datasheet
          Request / Contact

          Planer-Type Milling M/C - Double Column

          used  Planer-Type Milling M/C - Double Column AWEA - CNC LP 3016 YF


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-90330 · Planer-Type Milling M/C - Double Column

          AWEA - CNC - LP 3016 YF - - 2011 - Fanuc 18i MB

          Technical details
          x-travel 3000 mm︱y-travel 1600 mm︱z-travel 760 mm︱Control Fanuc 18i MB ︱column daylight 1700 mm︱table surface area 3260x1500 mm︱passage 1000 mm︱table load 10 t︱drive of main spindle 22 kW︱spindle turning speed - stepless 10-6000 U/min︱tool taper ISO 50 ︱rapid travel 20.000 mm/min︱rapid traverse Z-axis 10.000 m/min︱toolpiece magazine: chain magazine 32 Stück︱diameter of tools max. 127/215 mm︱Power connection 60 kVA︱total power requirement kW︱weight of the machine ca. 27 t︱dimensions of the machine ca. 9x4,7x4 m︱
            x-travel 3000 mm
            y-travel 1600 mm
            z-travel 760 mm
            Control Fanuc 18i MB
            column daylight 1700 mm
            table surface area 3260x1500 mm
            passage 1000 mm
            table load 10 t
            drive of main spindle 22 kW
            spindle turning speed - stepless 10-6000 U/min
            tool taper ISO 50
            rapid travel 20.000 mm/min
            rapid traverse Z-axis 10.000 m/min
            toolpiece magazine: chain magazi. 32 Stück
            diameter of tools max. 127/215 mm
            Power connection 60 kVA
            weight of the machine ca. 27 t
            dimensions of the machine ca. 9x4,7x4 m
          Datasheet
          Request / Contact
          used  Planer-Type Milling M/C - Double Column AWEA - CNC SP 3016


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-90331 · Planer-Type Milling M/C - Double Column

          AWEA - CNC - SP 3016 - - 2006 - Fanuc 18i MB

          Technical details
          x-travel 3000 mm︱y-travel 1600 mm︱z-travel 760 mm︱Control Fanuc 18i MB ︱column daylight 1700 mm︱table surface area 3260x1500 mm︱passage 1000 mm︱table load 10 t︱drive of main spindle 22 kW︱spindle turning speed - stepless 10-6000 U/min︱tool taper ISO 50 ︱rapid travel 20.000 mm/min︱rapid traverse Z-axis 10.000 m/min︱toolpiece magazine: chain magazine 32 Stück︱diameter of tools max. 127/215 mm︱Power connection 60 kVA︱total power requirement kW︱weight of the machine ca. 27 t︱dimensions of the machine ca. 9x4,7x4 m︱
            x-travel 3000 mm
            y-travel 1600 mm
            z-travel 760 mm
            Control Fanuc 18i MB
            column daylight 1700 mm
            table surface area 3260x1500 mm
            passage 1000 mm
            table load 10 t
            drive of main spindle 22 kW
            spindle turning speed - stepless 10-6000 U/min
            tool taper ISO 50
            rapid travel 20.000 mm/min
            rapid traverse Z-axis 10.000 m/min
            toolpiece magazine: chain magazi. 32 Stück
            diameter of tools max. 127/215 mm
            Power connection 60 kVA
            weight of the machine ca. 27 t
            dimensions of the machine ca. 9x4,7x4 m
          Datasheet
          Request / Contact
          used  Planer-Type Milling M/C - Double Column HARTFORD HB 3190 A


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-90333 · Planer-Type Milling M/C - Double Column

          HARTFORD - HB 3190 A - - 2004 - Fanuc 18 M

          Technical details
          x-travel 3000 mm︱y-travel 1970 mm︱z-travel 920 mm︱Control Fanuc 18 M ︱column daylight 2200 mm︱tool taper 50 ︱spindle turning speed - stepless 40-4.000 U/min︱table-size 3100x1830 mm︱toolpiece magazine: chain magazine 40 Stück︱drive of main spindle 22 kW︱total power requirement kW︱weight of the machine ca. 32 t︱dimensions of the machine ca. 9,7x6x4,7 m︱
            x-travel 3000 mm
            y-travel 1970 mm
            z-travel 920 mm
            Control Fanuc 18 M
            column daylight 2200 mm
            tool taper 50
            spindle turning speed - stepless 40-4.000 U/min
            table-size 3100x1830 mm
            toolpiece magazine: chain magazi. 40 Stück
            drive of main spindle 22 kW
            weight of the machine ca. 32 t
            dimensions of the machine ca. 9,7x6x4,7 m
          Datasheet
          Request / Contact
          used  Planer-Type Milling M/C - Double Column WALDRICH-COBURG 20-10 FP 320 NC


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80481 · Planer-Type Milling M/C - Double Column

          WALDRICH-COBURG - 20-10 FP 320 NC - - 1989 / retrofit 2007 - SIEMENS 840D Solutionline

          Technical details
          x-travel 11.700 mm︱y-travel 6.400 mm︱z-travel 975 mm︱w-travel 3.500 mm︱table: ︱table load 200 t︱table width 3.200 mm︱table length 2 x 5.500 mm︱Passage height 3.900 mm︱max. passage 3.600 mm︱diameter of quill mm︱spindle turning speed range max. 650 U/min︱rapid travel x/y/z 10 / 2,5 / 2,5 m/min︱output 100 kW︱control SIEMENS 840D Solutionline ︱quill: ISO 60 + ISO 50 ︱spindle drive 75 kW︱electrics - voltage/frequency 380/50 V/Hz︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          IKZ (not for heads) attachment head: clamping automactically high-speed spindle 35 kW, nmax. 2.400 rpm spindle extension 650 mm angular milling head 4 x 90°- short L = 475 mm angular milling head 4 x 90°- long L:= 1.400 mm
            x-travel 11.700 mm
            y-travel 6.400 mm
            z-travel 975 mm
            w-travel 3.500 mm
            table load 200 t
            table width 3.200 mm
            table length 2 x 5.500 mm
            Passage height 3.900 mm
            max. passage 3.600 mm
            spindle turning speed range max. 650 U/min
            rapid travel x/y/z 10 / 2,5 / 2,5 m/min
            output 100 kW
            control SIEMENS 840D Solutionline
            quill: ISO 60 + ISO 50
            spindle drive 75 kW
            electrics - voltage/frequency 380/50 V/Hz
            Description :
            IKZ (not for heads)

            attachment head: clamping automactically
            high-speed spindle 35 kW, nmax. 2.400 rpm
            spindle extension 650 mm
            angular milling head 4 x 90°- short L = 475 mm
            angular milling head 4 x 90°- long L:= 1.400 mm

          Datasheet
          Request / Contact
          used  Planer-Type Milling M/C - Double Column WALDRICH-SIEGEN WPF 75


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80479 · Planer-Type Milling M/C - Double Column

          WALDRICH-SIEGEN - WPF 75 - - 1975 -

          Technical details
          x-travel 13.000 mm︱y-travel 2.500 mm︱z-travel 2.250 mm︱w-travel 360 mm︱table: ︱double table 12.500 mm︱table load 50 t︱table width 2.400 mm︱bed length ca 26.000 mm︱Passage height 2.250 mm︱milling height 2.000 mm︱max. passage 2.750 mm︱diameter of quill 130 mm︱spindle turning speed range U/min︱transmission ratio ︱drive capacity - spindle motor kW︱spindle taper ︱dia. of quill 280 mm︱quill: ISO 50 ︱rapid travel x/y/z 8 / 1,5 / 3 m/min︱
          table guidance: hydrostatic universal angular head 37 kW angular milling head 37 kW angular milling head 56 kW
            x-travel 13.000 mm
            y-travel 2.500 mm
            z-travel 2.250 mm
            w-travel 360 mm
            double table 12.500 mm
            table load 50 t
            table width 2.400 mm
            bed length ca 26.000 mm
            Passage height 2.250 mm
            milling height 2.000 mm
            max. passage 2.750 mm
            diameter of quill 130 mm
            dia. of quill 280 mm
            quill: ISO 50
            rapid travel x/y/z 8 / 1,5 / 3 m/min
            Description :
            table guidance: hydrostatic
            universal angular head 37 kW
            angular milling head 37 kW
            angular milling head 56 kW
          Datasheet
          Request / Contact
          used  Planer-Type Milling M/C - Double Column WALDRICH-COBURG 20-10 FP 280


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20768 · Planer-Type Milling M/C - Double Column

          WALDRICH-COBURG - 20-10 FP 280 - - 1973/1999 - SIEMENS 840 C

          Technical details
          x-travel 17700 mm︱y-travel 4755 mm︱z-travel 800 mm︱milling width 3450 mm︱distance table - vertical milling spindle 3682 mm︱table height over floor 500 mm︱spindle diameter in front bearing 200 mm︱turning speed range 12 - 450 U/min︱tool taper ISO 60 ︱axial adjustment of the spindle slide 800 mm︱creep feed 5 und 50 mm/min︱feed stepless 10 - 3000 mm/min︱cross adjustment of cross beam milling head 4745 ︱rapid traverse 2 m/min︱creep feed 3 und 30 mm/min︱feed stepless 6 - 2000 mm/min︱rapid traverse 2 m/min︱creep feed 3 und 30 mm/min︱feed stepless 6 - 2000 mm/min︱vertical adjustment of cross beam 3682 mm︱
          + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and misc.tools
            x-travel 17700 mm
            y-travel 4755 mm
            z-travel 800 mm
            milling width 3450 mm
            distance table - vertical millin. 3682 mm
            table height over floor 500 mm
            spindle diameter in front bearin. 200 mm
            turning speed range 12 - 450 U/min
            tool taper ISO 60
            axial adjustment of the spindle . 800 mm
            creep feed 5 und 50 mm/min
            feed stepless 10 - 3000 mm/min
            cross adjustment of cross beam m. 4745
            rapid traverse 2 m/min
            creep feed 3 und 30 mm/min
            feed stepless 6 - 2000 mm/min
            rapid traverse 2 m/min
            creep feed 3 und 30 mm/min
            feed stepless 6 - 2000 mm/min
            vertical adjustment of cross bea. 3682 mm
            Description :
            + electrically renewed including cabinet, cabling and motors and equipped with
            a SIEMENS 840 C in 1999.
            + incl. 16 milling heads and misc.tools
          Datasheet
          Request / Contact
          used  Planer-Type Milling M/C - Double Column WALDRICH-SIEGEN PF-H-100 1-325/275 x 15.700


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80315 · Planer-Type Milling M/C - Double Column

          WALDRICH-SIEGEN - PF-H-100 1-325/275 x 15.700 - - 1971/2017 - Siemens 840 D SL

          Technical details
          x-travel 16000 mm︱y-travel 5000 mm︱z-travel 2450 mm︱w-travel 400 mm︱table: 2 x 7500 x 3000 ︱double table 15.700 x 3000 mm︱table load 150 t︱max. passage 3250 mm︱diameter of quill 320 mm︱spindle turning speed range 6-200, 200-600 U/min︱transmission ratio 2 ︱drive capacity - spindle motor 95 kW︱spindle taper ISO 60 ︱electrics - voltage/frequency 380/50 V/Hz︱Control Siemens 840 D SL ︱weight of the machine ca. 260 t︱dimensions of the machine ca. 34.000x10.000x11,500 m︱angular milling head 10x
          Retrofit in 2016: - electrics including cabling and cabinet new - new CNC-control SIEMENS 840 D Solution line - hydrostatic guideways for table with 6 pumps and 2 pumps for tank - change from DC to AC (motors) - all guideways geometrically overhauled (laser measured) - modifcation cross beam to gantry type - all guideway covers new - delivery end of October 2016 - spindle drive changed into 3-phase current - misc. milling heads - 10 pcs. - especially for diesel-engines + CE-certified in June 2017 + inspectable under power +
            x-travel 16000 mm
            y-travel 5000 mm
            z-travel 2450 mm
            w-travel 400 mm
            table: 2 x 7500 x 3000
            double table 15.700 x 3000 mm
            table load 150 t
            max. passage 3250 mm
            diameter of quill 320 mm
            spindle turning speed range 6-200, 200-600 U/min
            transmission ratio 2
            drive capacity - spindle motor 95 kW
            spindle taper ISO 60
            electrics - voltage/frequency 380/50 V/Hz
            Control Siemens 840 D SL
            weight of the machine ca. 260 t
            dimensions of the machine ca. 34.000x10.000x11,500 m
            angular milling head 10x
            Description :
            Retrofit in 2016:
            - electrics including cabling and cabinet new
            - new CNC-control SIEMENS 840 D Solution line
            - hydrostatic guideways for table with 6 pumps and 2 pumps for tank
            - change from DC to AC (motors)
            - all guideways geometrically overhauled (laser measured)
            - modifcation cross beam to gantry type
            - all guideway covers new - delivery end of October 2016
            - spindle drive changed into 3-phase current
            - misc. milling heads - 10 pcs. - especially for diesel-engines

            + CE-certified in June 2017 + inspectable under power +
          Datasheet
          Request / Contact
          used  Planer-Type Milling M/C - Double Column WALDRICH-SIEGEN LF 3550 / 4000 CS


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-80480 · Planer-Type Milling M/C - Double Column

          WALDRICH-SIEGEN - LF 3550 / 4000 CS - - 1966/retrofit 2010 - SIEMENS 840 D Powerline

          Technical details
          x-travel 14.000 mm︱y-travel 4.480 mm︱z-travel 3.000 mm︱w-travel 300 mm︱table: ︱table load 145 t︱table width 3.100 mm︱table length 14.770 mm︱Passage height 3.800 mm︱max. passage 3.200 mm︱diameter of quill 305 mm︱spindle turning speed range max. 600 U/min︱rapid travel x/y/z 6 / 6 / 12 m/min︱output 100 kW︱control SIEMENS 840 D Powerline ︱quill: ISO 60 ︱electrics - voltage/frequency 380/50 V/Hz︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          table guiding: hydrostatic redesigned hydrostatics calculated to a maximum load of 450 tons orthogonal milling head ISO 60 angular milling head ISO 60
            x-travel 14.000 mm
            y-travel 4.480 mm
            z-travel 3.000 mm
            w-travel 300 mm
            table load 145 t
            table width 3.100 mm
            table length 14.770 mm
            Passage height 3.800 mm
            max. passage 3.200 mm
            diameter of quill 305 mm
            spindle turning speed range max. 600 U/min
            rapid travel x/y/z 6 / 6 / 12 m/min
            output 100 kW
            control SIEMENS 840 D Powerline
            quill: ISO 60
            electrics - voltage/frequency 380/50 V/Hz
            Description :
            table guiding: hydrostatic
            redesigned hydrostatics calculated to a maximum load of 450 tons

            orthogonal milling head ISO 60
            angular milling head ISO 60
          Datasheet
          Request / Contact

          Universal Milling and Boring Machine

          used  Universal Milling and Boring Machine TOS FNGJ 32


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20936 · Universal Milling and Boring Machine

          TOS - FNGJ 32 - - 1993 -

          Technical details
          x-travel 600 mm︱y-travel 400 mm︱z-travel 400 mm︱table-size 800x400 mm︱quill stroke ca. 100 mm︱turning speed - milling spindle 40-2000 U/min︱feed range X, Y: 8-400 mm/min︱feed range Z: 4-200 mm/min︱rapid travel - x-direction 2000 mm/min︱rapid travel in y-direction 2000 mm/min︱rapid traverse cross 1000 mm/min︱vertical head swivelling +/- 90 Grad︱weight of the machine ca. 2 t︱dimensions of the machine ca. 2,1x1,7x1,7 m︱
          Universal milling machine with DRO for 3 axis, sviweable vertical milling head and horizontal milling spindle. -incl. knee and milling 3 arbors for milling discs -incl. 9 tool holder ISO 40
            x-travel 600 mm
            y-travel 400 mm
            z-travel 400 mm
            table-size 800x400 mm
            quill stroke ca. 100 mm
            turning speed - milling spindle 40-2000 U/min
            feed range X, Y: 8-400 mm/min
            feed range Z: 4-200 mm/min
            rapid travel - x-direction 2000 mm/min
            rapid travel in y-direction 2000 mm/min
            rapid traverse cross 1000 mm/min
            vertical head swivelling +/- 90 Grad
            weight of the machine ca. 2 t
            dimensions of the machine ca. 2,1x1,7x1,7 m
            Description :
            Universal milling machine with DRO for 3 axis, sviweable vertical milling head
            and horizontal milling spindle.
            -incl. knee and milling 3 arbors for milling discs
            -incl. 9 tool holder ISO 40
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

            Trader Profile:   SK Maschinen-Service GmbH

          Contact Trader



            SK Maschinen-Service GmbH
           Tackweg 4
            47918 - Tönisvorst
            Deutschland
            02151 79350">02151 79350
            02151 793535
            info@sk-maschinen.de
            www.sk-maschinen.de

          Profile of Trader

          ABOUT US



          Since 1974 SK Maschinen is one of the leading addresses world-wide for buying and selling of pre-used machines and equipment mainly for the metal working industry.

          OUR TEAM


          Jutta Krins

          Managing Director / CEO

           +49 (0)2151 - 79 35-0 

           +49 (0)2151 - 79 35-35 

           info@sk-maschinen.de


          Valentin Wienert

          Managing Director / CEO

           +49 (0)2151 - 79 35-0 

           +49 (0)2151 - 79 35-35 

           info@sk-maschinen.de


          Mustafa Ercetin

          Sales

           +49 (0)2151 - 79 35-0 

           +49 (0)2151 - 79 35-35 

           info@sk-maschinen.de




          SK Maschinen-Service GmbH   47918 - Tönisvorst Tackweg 4 Deutschland
          SK Maschinen-Service GmbH

          Tackweg 4



          Contact Trader


            SK Maschinen-Service GmbH
           Tackweg 4
            47918 - Tönisvorst
            Deutschland
            02151 79350
            02151 793535
            info@sk-maschinen.de
            www.sk-maschinen.de
            Contact person:
          Herrn Mustafa Ercetin 02151 79350

           




          Machine category


          Abkantpresse - hydraulisch · Abwälzfräser · Anreißplatte · Anzugsbolzen · Aufspannplatte · Aufspanntisch · Aufspannwinkel · Aufspannwürfel · Bandsäge · Bohrer · Bohrkopf · Bohrwerkstisch · CNC Drehmaschine · Drehmaschine - zyklengesteuert · Einstellgerät · Elektronik / SPS-Steuerungen · Ersatzteile · Flachschleifmaschine · Flanschenbohrmaschine · Frequenzumwandler · Fräseinrichtung · Fräsmaschine - Universal · Futter · Führungsbahnschleifmaschine - Doppelst. · Gewindebohrvorrichtung · Horizontale - Flachschleifmaschine · Karusselldrehmaschine - Einständer · Kompressor · Kompressoren · Koordinatenbohrmaschine · Lateralfräsmaschine · Messplatte · Meßmittel · Motor · Nutenziehmaschine · Planscheibe · Plattenbohrwerk - Traghülse · Portalfräsmaschine · Profilstahlschere · Pumpenaggregat · Radialbohrmaschine · Reibahle · Reitstock · Rundschleifmaschine - Außen · Schleifapparat · Schleifbock · Schleifscheibe · Schleifscheibenflansch · Schwerdrehmaschine · Spannfutter · Spannmittel · Spitzendrehbank · Späneförderer · Stossmesser · Tieflochbohrmaschine · Tischbohrwerk · Transportsysteme · Transportwagen · Umluftofen · Universal-Fräs- und Bohrmaschine · Vertikaldrehmaschine · Verzahnungsmeßmaschine · Wendespanner · Werkzeug Voreinstellgerät · Werkzeugaufnahme · Werkzeughalter · Werkzeugwagen · Zahnradentgratmaschine · Zweiständerlanghobelmaschine ·