European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Gear cutting machines

          Machinelist: Gear cutting machines


          Autom. Rack Milling Machine

          used Gear cutting machines Autom. Rack Milling Machine KNAPP-DONAU UZFM 300 H


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23252 · Autom. Rack Milling Machine

          KNAPP-DONAU - UZFM 300 H - - 1964 -

          Technical details
          hobbing length 1750 mm︱milling width 260 mm︱max. module 10 ︱table size incl. water gutter 460 x 2100 mm︱table clamping surface: 250 x 1850 mm︱cutter width - max. 100 mm︱feed of the milling slide, stepless 0 - 500 mm/min.︱rapid traverse feeds 3000 mm/min︱milling head -swivable +/- 30 °︱Rotation speed range of milling head, in 9 steps 29 - 178 rpm︱Milling head swivable 2 sides helical gearcutting 30 °︱total power requirement 4 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. 4 x 1,85 x 1,85 m︱
          Accessories: Change gears Milling arbors Operating instructions
            hobbing length 1750 mm
            milling width 260 mm
            max. module 10
            table size incl. water gutter 460 x 2100 mm
            table clamping surface: 250 x 1850 mm
            cutter width - max. 100 mm
            feed of the milling slide, stepl. 0 - 500 mm/min.
            rapid traverse feeds 3000 mm/min
            milling head -swivable +/- 30 °
            Rotation speed range of milling . 29 - 178 rpm
            Milling head swivable 2 sides he. 30 °
            total power requirement 4 kW
            weight of the machine ca. 4 t
            dimensions of the machine ca. 4 x 1,85 x 1,85 m
            Description :
            Accessories:
            Change gears
            Milling arbors
            Operating instructions


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact

          Bevel Gear Generator - Spiral

          used Gear cutting machines Bevel Gear Generator - Spiral HURTH-MODUL KF 250 B


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24006 · Bevel Gear Generator - Spiral

          HURTH-MODUL - KF 250 B - - 1998 - Siemens Sinumerik 840 C

          Technical details
          workpiece diameter with ratio 1:10 300 mm︱workpiece diameter with ratio 1:1 212 mm︱max. number of teeth 200 ︱min. number of teeth 6 ︱x-travel 300 mm︱X - Axis speed 0,1-5.000 mm/sec.︱y-travel 400 mm︱Y - Axis speed 0,1-5.000 mm/sec.︱A - axis -170 / +170 °︱control Siemens Sinumerik 840 C ︱total power requirement 38 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 4,20 x 2,20 x 2,10 m︱
          incl. suction
            workpiece diameter with ratio 1:. 300 mm
            workpiece diameter with ratio 1:. 212 mm
            max. number of teeth 200
            min. number of teeth 6
            x-travel 300 mm
            X - Axis speed 0,1-5.000 mm/sec.
            y-travel 400 mm
            Y - Axis speed 0,1-5.000 mm/sec.
            A - axis -170 / +170 °
            control Siemens Sinumerik 840 C
            total power requirement 38 kW
            weight of the machine ca. 10 t
            dimensions of the machine ca. 4,20 x 2,20 x 2,10 m
            Description :
            incl. suction



        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Generator - Spiral KLINGELNBERG KNC 25 P


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-16040 · Bevel Gear Generator - Spiral

          KLINGELNBERG - KNC 25 P - - 1997 -

          Technical details
          max. wheel diameter 275 mm︱gear width 150 mm︱max. module 6 ︱min. module 1,5 ︱total power requirement 62 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4,7x4,4x2,45 m︱
          max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min
            max. wheel diameter 275 mm
            gear width 150 mm
            max. module 6
            min. module 1,5
            total power requirement 62 kW
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4,7x4,4x2,45 m
            Description :
            max. wheel diameter mm
            gear width mm
            max. module 6
            min. module 1.5
            max. workpiece diameter 275 mm
            tooth width max. 5.5 mm
            spiral angle 0 - 60 °
            number of teeth 5 - 120
            transmission ratio min. 1:1
            transmission ratio max. 1:10
            milling drive motor 20 kW
            workpiece drive 14.5 kW
            total power requirement 62 kVA
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4,7 x 4,387 x 2,45 m



            Tool spindle (D-axis)
            - workpiece spindle speed (infinitely) 60 to 350 [...]

            Tool positioning axis (E-axis)
            - swivel range 0 to 360°
            - swivel speed max. 19.5°/s

            Workpiece spindle (B-axis)
            - mounting diameter outer cone (1: 4) 140 mm
            - standard internal cone (1:20) 99.218 mm
            - workpiece spindle speed max. 300 [...]
            - workpiece spindle passage 90 mm

            Workpiece positioning axis (Y-axis)
            - travel 870 mm
            - speed max. 4.5 m/min

            Roller rotation axis (A-axis)
            - swivel range 315°
            - swivel speed max. 40°/s

            Axis intersection (Z-axis)
            - travel range max. +/- 50 mm
            - speed max. 0.657 m/min

            Workpiece swivel axis (C-axis)
            - swivel range -8.5 to 98°
            - swivel speed max. 21.5 °/s

            Milling depth axis (X-axis)
            - travel from -25 to 640 mm
            - max. speed 6 m/min

            Machinen distance (V-axis)
            - travel 150 mm
            - speed max. 1.6 m/min




        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Generator - Spiral KLINGELNBERG KNC 25 P


          • Leyendecker & Hollmann GmbH
          • Giesenheide 18
          • 40724 Hilden
          • Deutschland

          • +49 (2103) 28097-0
            +49 (2103) 28097-99
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02478 · Bevel Gear Generator - Spiral

          KLINGELNBERG - KNC 25 P - - 1997 -

          Technical details
          max. wheel diameter 275 mm︱gear width 150 mm︱max. module 6 ︱min. module 1.5 ︱max. workpiece diameter 275 mm︱tooth width max. 5.5 mm︱spiral angle 0 - 60 °︱number of teeth 5 - 120 ︱transmission ratio min. 1:1 ︱transmission ratio max. 1:10 ︱milling drive motor 20 kW︱workpiece drive 14.5 kW︱total power requirement 62 kVA︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4,7 x 4,387 x 2,45 m︱
          Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min - 13 milling cutters included -
            max. wheel diameter 275 mm
            gear width 150 mm
            max. module 6
            min. module 1.5
            max. workpiece diameter 275 mm
            tooth width max. 5.5 mm
            spiral angle 0 - 60 °
            number of teeth 5 - 120
            transmission ratio min. 1:1
            transmission ratio max. 1:10
            milling drive motor 20 kW
            workpiece drive 14.5 kW
            total power requirement 62 kVA
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4,7 x 4,387 x 2,45 m
            Description :
            Tool spindle (D-axis)
            - workpiece spindle speed (infinitely) 60 to 350 r.p.m.

            Tool positioning axis (E-axis)
            - swivel range 0 to 360°
            - swivel speed max. 19.5°/s

            Workpiece spindle (B-axis)
            - mounting diameter outer cone (1: 4) 140 mm
            - standard internal cone (1:20) 99.218 mm
            - workpiece spindle speed max. 300 r.p.m.
            - workpiece spindle passage 90 mm

            Workpiece positioning axis (Y-axis)
            - travel 870 mm
            - speed max. 4.5 m/min

            Roller rotation axis (A-axis)
            - swivel range 315°
            - swivel speed max. 40°/s

            Axis intersection (Z-axis)
            - travel range max. +/- 50 mm
            - speed max. 0.657 m/min

            Workpiece swivel axis (C-axis)
            - swivel range -8.5 to 98°
            - swivel speed max. 21.5 °/s

            Milling depth axis (X-axis)
            - travel from -25 to 640 mm
            - max. speed 6 m/min

            Machinen distance (V-axis)
            - travel 150 mm
            - speed max. 1.6 m/min

            - 13 milling cutters included -


        • Leyendecker & Hollmann GmbH
        • Giesenheide 18
        • 40724 Hilden
        • Deutschland

        • 36.000 €
          Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Generator - Spiral WMW-MODUL MK 12


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00446 · Bevel Gear Generator - Spiral

          WMW-MODUL - MK 12 - - - konventionell

          Technical details
          weight 29,4 kg︱
          WMW MODULE Arcoid cutter head MK 12" 2§m - 304.8 for bevel gears with tapered tooth height analog Gleason for bevel gear milling machine MODUL ZFTKK 500 28 knife inserts 05M VESTA WORKS 552 A-311 AJ/ck 30499005 used weight 29.4kg We have 4 different types in stock. You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            weight 29,4 kg
            Description :
            WMW MODULE
            Arcoid cutter head
            MK 12"
            2§m - 304.8
            for bevel gears with tapered tooth height
            analog Gleason
            for bevel gear milling machine MODUL ZFTKK 500
            28 knife inserts 05M
            VESTA WORKS 552 A-311
            AJ/ck
            30499005
            used
            weight 29.4kg

            We have 4 different types in stock.

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 1.500 €
          Datasheet
          Request / Contact

          Bevel Gear Generator - Straight

          used Gear cutting machines Bevel Gear Generator - Straight GLEASON 104 CONIFLEX


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-20211 · Bevel Gear Generator - Straight

          GLEASON - 104 CONIFLEX - - 1997 - Fanuc 0-GC

          Technical details
          max. wheel diameter 216 mm︱tooth width 35 mm︱max. module 8,5 ︱min. module 1,3 ︱ratio 10 : 1 ︱cone distance min./max. 0 - 108 mm︱min/max. pitch cone angle 5°42' - 84°18' ︱cutter speeds 30 - 87 m/min︱feed 4,2 - 69,2 m/min︱main drive motor 3,7 kW︱Control Fanuc 0-GC ︱total power requirement 5 kW︱weight of the machine ca. 7 t︱
          - CNC Control Fanuc 0-GC - Set of Change Gears For Speed, Feed and Roll, Index and Ratio Roll - Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut) - Self-Contained Hydraulic System - Self-Contained Coolant System - Workhead Brake - Full Guards Cover - Full Compliment of Electrics (Motor/Controls) SPECIFICATIONS: Cone Distance: 0 to 4-1/2" Pitch Angle: 84 deg. 18 min. (max); 5 deg. 42 min. (min) Extreme Ratio: 10-to-1 Pitch Diameter: 10-to-1 ratio; 8-1/2" (max) Pitch Diameter: 1-to-1 ratio; 6" (max) Diametral Pitch (coarsest): 3 DP Diametral Pitch (finest): 20 DP Face Width: 1-3/8" (max) Index Range: 9 to 93 inclusive, and most numbers up to 175 Pressure Angles: 20, 22-1/2 & 25 deg. Diameter of Taper Hole at Large : 3-29/32" Taper per Foot: 39/64" Depth of Taper: 6" Diameter of Hole Through: 2-7/16" Spindle Nose to Machine Center: 1-1/2" to 9" Cutter Speeds: 98 to 286 (feet per minute) Feeds: 4.2 to 69.2 (seconds per tooth)
            max. wheel diameter 216 mm
            tooth width 35 mm
            max. module 8,5
            min. module 1,3
            ratio 10 : 1
            cone distance min./max. 0 - 108 mm
            min/max. pitch cone angle 5°42' - 84°18'
            cutter speeds 30 - 87 m/min
            feed 4,2 - 69,2 m/min
            main drive motor 3,7 kW
            Control Fanuc 0-GC
            total power requirement 5 kW
            weight of the machine ca. 7 t
            Description :
            - CNC Control Fanuc 0-GC
            - Set of Change Gears For Speed, Feed and Roll, Index and Ratio Roll
            - Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut)
            - Self-Contained Hydraulic System
            - Self-Contained Coolant System
            - Workhead Brake
            - Full Guards Cover
            - Full Compliment of Electrics (Motor/Controls)

            SPECIFICATIONS:

            Cone Distance: 0 to 4-1/2"
            Pitch Angle: 84 deg. 18 min. (max); 5 deg. 42 min. (min)
            Extreme Ratio: 10-to-1
            Pitch Diameter: 10-to-1 ratio; 8-1/2" (max)
            Pitch Diameter: 1-to-1 ratio; 6" (max)
            Diametral Pitch (coarsest): 3 DP
            Diametral Pitch (finest): 20 DP
            Face Width: 1-3/8" (max)
            Index Range: 9 to 93 inclusive, and most numbers up to 175
            Pressure Angles: 20, 22-1/2 & 25 deg.
            Diameter of Taper Hole at Large : 3-29/32"
            Taper per Foot: 39/64"
            Depth of Taper: 6"
            Diameter of Hole Through: 2-7/16"
            Spindle Nose to Machine Center: 1-1/2" to 9"
            Cutter Speeds: 98 to 286 (feet per minute)
            Feeds: 4.2 to 69.2 (seconds per tooth)



        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Generator - Straight KLINGELNBERG BF 204


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-07681 · Bevel Gear Generator - Straight

          KLINGELNBERG - BF 204 - - 1980 -

          Technical details
          max. wheel diameter 180 mm︱gear width 60 mm︱max. module 8 / 10 ︱min. module 1,5 ︱tooth length max. 16 mm︱no. of teeth Segment 6 ︱no. of teeth Vollrundung 6-30 ︱pivoting angle 0 - 10 °︱inserted tooth milling cutter dia. 600 mm︱cutting speed Frässpindel 48-78 m/min︱root circle dia. min. 50 mm︱electrics - voltage/frequency 380 / 50 V/Hz︱total power requirement 16 kW︱weight of the machine ca. 7,6 t︱
          Segmental Gear Generating Machine - specifically for rational production of tapered or cylindrical segmental gears, such as steering sector shafts. This model also operates to the generating-indexing method and permits tooth thickness modifications on the centre Tooth. with chip conveyor and handbooks ex works South Americ
            max. wheel diameter 180 mm
            gear width 60 mm
            max. module 8 / 10
            min. module 1,5
            tooth length max. 16 mm
            no. of teeth Segment 6
            no. of teeth Vollrundung 6-30
            pivoting angle 0 - 10 °
            inserted tooth milling cutter di. 600 mm
            cutting speed Frässpindel 48-78 m/min
            root circle dia. min. 50 mm
            electrics - voltage/frequency 380 / 50 V/Hz
            total power requirement 16 kW
            weight of the machine ca. 7,6 t
            Description :
            Segmental Gear Generating Machine - specifically for rational production of
            tapered or cylindrical segmental gears, such as steering sector shafts.
            This model also operates to the generating-indexing method and permits tooth
            thickness modifications on the centre Tooth.

            with chip conveyor and handbooks
            ex works South Americ


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Generator - Straight KLINGELNBERG


          • Zuefle GmbH
          • Levi-Strauss-Str. 121
          • 97232 Giebelstadt
          • Deutschland

          • +49 (0)9334-978608-0
            +49 (0)9334-978608-2
          • info@zuefle.com
            www.zuefle.com
          #1139-00397 · Bevel Gear Generator - Straight

          KLINGELNBERG - - - - konventionell

          Technical details

          KLINGELNBERG Palloid gear hobs We have around 450 milling cutters in stock in the module range from 1-7. Manufacturer KLINGELNBERG Please contact us! You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.
            Description :
            KLINGELNBERG
            Palloid gear hobs
            We have around 450 milling cutters in stock in the module range from 1-7.

            Manufacturer KLINGELNBERG

            Please contact us!

            You can come and inspect the article at our warehouse in Giebelstadt about 80min. from FRANKFURT AIRPORT.


        • Zuefle GmbH
        • Levi-Strauss-Str. 121
        • 97232 Giebelstadt
        • Deutschland

        • 3.100 €
          Datasheet
          Request / Contact

          Bevel Gear Grinding Machine

          used Gear cutting machines Bevel Gear Grinding Machine GLEASON Phoenix 275 G


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17944 · Bevel Gear Grinding Machine

          GLEASON - Phoenix 275 G - - 2008 - SIN 840 D SIEMENS

          Technical details
          ratio of transmission 10:1 ︱min. number of teeth 3 ︱max. number of teeth 200 ︱range of tooth size 20 mm︱tooth width max. 58 mm︱diameter of tools min 69,85 mm︱diameter of tools max. 230 mm︱x-axis 325 mm︱y-axis 350 mm︱z-axis 470 mm︱work piece table - Ø 212,71 mm︱b-axis + 90,1 / - 1 °︱Control SIN 840 D SIEMENS︱total power requirement 75 kW︱weight of the machine ca. 10.000 Kg︱dimensions of the machine ca. 6,10 x 4,40 x 3,30 m︱
          coolant filter system available
            ratio of transmission 10:1
            min. number of teeth 3
            max. number of teeth 200
            range of tooth size 20 mm
            tooth width max. 58 mm
            diameter of tools min 69,85 mm
            diameter of tools max. 230 mm
            x-axis 325 mm
            y-axis 350 mm
            z-axis 470 mm
            work piece table - Ø 212,71 mm
            b-axis + 90,1 / - 1 °
            Control SIN 840 D SIEMENS
            total power requirement 75 kW
            weight of the machine ca. 10.000 Kg
            dimensions of the machine ca. 6,10 x 4,40 x 3,30 m
            Description :
            coolant filter system available


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine GLEASON Phoenix 275 G


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17513 · Bevel Gear Grinding Machine

          GLEASON - Phoenix 275 G - - 2007 - 160 i - MB FANUC

          Technical details
          ratio of transmission 10:1 ︱min. number of teeth 3 ︱max. number of teeth 200 ︱range of tooth size 20 mm︱diameter of tools min 69,85 mm︱tooth width max. 58 mm︱diameter of tools max. 230 mm︱x-axis 325 mm︱y-axis 350 mm︱z-axis 470 mm︱work piece table - Ø 212,71 mm︱b-axis + 90,1 / - 1 °︱Control 160 i - MB FANUC︱total power requirement 75 kW︱weight of the machine ca. 10.000 Kg︱dimensions of the machine ca. 6,10 x 4,40 x 3,30 m︱
          WAGURI with EWAB robot cell (KUKA Robot) no coolant filter system available
            ratio of transmission 10:1
            min. number of teeth 3
            max. number of teeth 200
            range of tooth size 20 mm
            diameter of tools min 69,85 mm
            tooth width max. 58 mm
            diameter of tools max. 230 mm
            x-axis 325 mm
            y-axis 350 mm
            z-axis 470 mm
            work piece table - Ø 212,71 mm
            b-axis + 90,1 / - 1 °
            Control 160 i - MB FANUC
            total power requirement 75 kW
            weight of the machine ca. 10.000 Kg
            dimensions of the machine ca. 6,10 x 4,40 x 3,30 m
            Description :
            WAGURI
            with EWAB robot cell
            (KUKA Robot)
            no coolant filter system available


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine GLEASON Phoenix 275 G


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17512 · Bevel Gear Grinding Machine

          GLEASON - Phoenix 275 G - - 2005 - SIN 840 D SIEMENS

          Technical details
          ratio of transmission 10:1 ︱min. number of teeth 3 ︱max. number of teeth 200 ︱range of tooth size 20 mm︱tooth width max. 58 mm︱diameter of tools min 69,85 mm︱diameter of tools max. 230 mm︱x-axis 325 mm︱y-axis 350 mm︱z-axis 470 mm︱work piece table - Ø 212,71 mm︱b-axis + 90,1 / - 1 °︱Control SIN 840 D SIEMENS︱total power requirement 75 kW︱weight of the machine ca. 10.000 Kg︱dimensions of the machine ca. 6,10 x 4,40 x 3,30 m︱
          WAGURI with EWAB load cell built in 2012 (Linear loader) no coolant filter system available
            ratio of transmission 10:1
            min. number of teeth 3
            max. number of teeth 200
            range of tooth size 20 mm
            tooth width max. 58 mm
            diameter of tools min 69,85 mm
            diameter of tools max. 230 mm
            x-axis 325 mm
            y-axis 350 mm
            z-axis 470 mm
            work piece table - Ø 212,71 mm
            b-axis + 90,1 / - 1 °
            Control SIN 840 D SIEMENS
            total power requirement 75 kW
            weight of the machine ca. 10.000 Kg
            dimensions of the machine ca. 6,10 x 4,40 x 3,30 m
            Description :
            WAGURI
            with EWAB load cell built in 2012
            (Linear loader)
            no coolant filter system available


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine KLINGELNBERG G 27


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17966 · Bevel Gear Grinding Machine

          KLINGELNBERG - G 27 - - 2005 - SINUMERIK 840 D

          Technical details
          max. wheel diameter 300 mm︱max. module 8 ︱min. module 0,7 ︱Control SINUMERIK 840 D ︱min/max. pitch cone angle - 90 / + 90 °︱workpiece spindle - bore 127 mm︱grinding wheel diameter 50 - 230 mm︱spindle speeds (infinitely variable) 7.500 U/min︱total power requirement 146 kW︱work piece spindle speed 700 U/min︱weight of the machine ca. 21 t︱dimensions of the machine ca. 9,5 x 3,6 x 3,1 m︱
          Measuring probe 1 grinding wheel with flange 1 dressing wheel Coolant nozzle ring not present Clamping devices not available Kraft&Bauer fire extinguishing system without CO2 bottle ELBARON Hoffmann filter system AFD 1.0 (2005) Grinding sludge container Stainless steel base tray for machine Stainless steel tray for filter system Machine shoes (fixators)
            max. wheel diameter 300 mm
            max. module 8
            min. module 0,7
            Control SINUMERIK 840 D
            min/max. pitch cone angle - 90 / + 90 °
            workpiece spindle - bore 127 mm
            grinding wheel diameter 50 - 230 mm
            spindle speeds (infinitely varia. 7.500 U/min
            total power requirement 146 kW
            work piece spindle speed 700 U/min
            weight of the machine ca. 21 t
            dimensions of the machine ca. 9,5 x 3,6 x 3,1 m
            Description :
            Measuring probe
            1 grinding wheel with flange
            1 dressing wheel
            Coolant nozzle ring not present
            Clamping devices not available
            Kraft&Bauer fire extinguishing system without CO2 bottle
            ELBARON
            Hoffmann filter system AFD 1.0 (2005)
            Grinding sludge container
            Stainless steel base tray for machine
            Stainless steel tray for filter system
            Machine shoes (fixators)


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine GLEASON PHOENIX  200 HG


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-328540 · Bevel Gear Grinding Machine

          GLEASON - PHOENIX 200 HG - - 1997 -

          Technical details
          max. wheel diameter 215 mm︱gear width 40,65 mm︱max. module ︱total power requirement 20 kW︱weight of the machine ca. 10 t︱
          Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
            max. wheel diameter 215 mm
            gear width 40,65 mm
            total power requirement 20 kW
            weight of the machine ca. 10 t
            Description :
            Max. external Ø of workpiece 215 mm
            Tooth profile, height x width 16 x 40.65 mm
            No. of teeth 5 - 200
            Max. tooth ratio 1 : 10

            Grinding wheel Ø 51 - 190 mm
            Grinding wheel speeds 1,000 - 6,000 rpm

            X Axis (horizontal) 152 mm
            Y Axis (vertical) 178 mm
            Z Axis (slide base plate) 304 mm
            Distance from middle of machine to middle of workspindle 115 mm
            Axial speed 125 mm/sec
            Workpiece speeds 0 - 30 rpm

            Workspindle bore, conical 3 29/32 inch

            Total electrical load 20 kW - 380 V - 50 Hz
            Weight, approx. 10,000 kg

            Accessories / Special Features

            * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters.
            * Extensive coolant equipment with filter system, band filter, etc.
            * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing.
            * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times.


            Condition : Very good - machine can be inspected here under power
            Delivery : Ex stock, as inspected
            Payment : Net, after conclusion of contract

            Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine GLEASON 120 / 888 W


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-304112 · Bevel Gear Grinding Machine

          GLEASON - 120 / 888 W - - 1980 -

          Technical details
          max. wheel diameter 1010 mm︱gear width 0 mm︱max. module ︱min. module ︱total power requirement 15 kW︱weight of the machine ca. 9,5 t︱dimensions of the machine ca. m︱
          Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * Automatic roughing and finishing process via pre-settable counter and built-in feed cam. * Counter for number of teeth. * Counter for number of dressing cycles. * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. * Various small parts.
            max. wheel diameter 1010 mm
            total power requirement 15 kW
            weight of the machine ca. 9,5 t
            Description :
            Max. depth of tooth 10 mm
            Max. workpiece Ø (for clearance) 1,010 mm
            Max. external Ø of coupling 610 mm

            Sliding base withdraw 216 mm
            Max. distance from grinding wheel to workpiece nose 90 - 430 mm
            Max. weight of workpiece, including clamp 500 kg

            No. of teeth 32 to 150

            Grinding wheel Ø, approx 152 - 320 mm
            Grinding wheel speeds, infinitely variable 0 - 3,600 rpm

            Work spindle bore 60 mm

            Total electrical load, approx. 15 kW - 380 V - 50 Hz
            Weight, approx. 9,500 kg

            Accessories / Special Features
            * Automatic roughing and finishing process via pre-settable counter and
            built-in feed cam.
            * Counter for number of teeth.
            * Counter for number of dressing cycles.
            * 2 built-on dressing units with three dressing diamonds for radius dressing,
            side dressing and wheel end dressing.
            * Built-on index plate for 48 teeth.
            * Separate coolant device with band filter.
            * Separate hydraulic unit.
            * Separate TRION oil mist exhaust.
            * Various small parts.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Bevel Gear Lapping Machine

          used Gear cutting machines Bevel Gear Lapping Machine GLEASON 600 HTL


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-18008 · Bevel Gear Lapping Machine

          GLEASON - 600 HTL - - 2007 - GE FANUC Series 160i-M

          Technical details
          crown gear diamter max. 600 mm︱pinion diameter - max. 254 mm︱crown gear turning speeds max. 3.100 U/min︱pinion turning speeds max. 3.100 U/min︱control GE FANUC Series 160i-M ︱pinion cone range 165-345 mm︱crown gear cone range 89 - 267 mm︱lapping torque 2 - 24 Nm︱total power requirement 36 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 1,80 x 2,40 x 1,90 m︱
          Own lapping system! Was also operated at a lapping center
            crown gear diamter max. 600 mm
            pinion diameter - max. 254 mm
            crown gear turning speeds max. 3.100 U/min
            pinion turning speeds max. 3.100 U/min
            control GE FANUC Series 160i-M
            pinion cone range 165-345 mm
            crown gear cone range 89 - 267 mm
            lapping torque 2 - 24 Nm
            total power requirement 36 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 1,80 x 2,40 x 1,90 m
            Description :
            Own lapping system!
            Was also operated at a lapping center



        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Lapping Machine OERLIKON L 60


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-18007 · Bevel Gear Lapping Machine

          OERLIKON - L 60 - - 2002 - GE FANUC Series 160i-M

          Technical details
          crown gear diamter max. 500 mm︱distance crown gear spindle - front pinion spindle 150 - 350 mm︱distance pinion spindle - front crown gear spindle 120 - 340 mm︱control GE FANUC Series 160i-M70 mm︱pinion turning speeds max. 0 - 3.000 mm︱crown gear turning speeds max. 0 - 2.600 U/min︱inner taper pinion spindle Ø 99,2 mm︱inner tape crown gear spindle Ø 99,2 mm︱rated current 30 A︱weight of the machine ca. 6,40 t︱dimensions of the machine ca. 2,40 x 2,20 x 2,10 m︱
          Own lapping system! Was also operated at a lapping center
            crown gear diamter max. 500 mm
            distance crown gear spindle - fr. 150 - 350 mm
            distance pinion spindle - front . 120 - 340 mm
            control GE FANUC Series 160i-M
            70 mm
            pinion turning speeds max. 0 - 3.000 mm
            crown gear turning speeds max. 0 - 2.600 U/min
            inner taper pinion spindle Ø 99,2 mm
            inner tape crown gear spindle Ø 99,2 mm
            rated current 30 A
            weight of the machine ca. 6,40 t
            dimensions of the machine ca. 2,40 x 2,20 x 2,10 m
            Description :
            Own lapping system!
            Was also operated at a lapping center


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Lapping Machine KLINGELNBERG LKR 400 A 100


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-490759 · Bevel Gear Lapping Machine

          KLINGELNBERG - LKR 400 A 100 - - 1974 -

          Technical details
          max. wheel diameter 400 mm︱gear width NA mm︱max. module 1 ︱min. module 10 ︱total power requirement 12 kW︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. m︱
          K L I N G E L N B E R G (Germany) Automatic Bevel Gear Lapping Machine Model LKR 400 A 100 Year 1974/1998 Serial No. 1890 Partially reconditioned and electrically modernized in 1998 by Welter Company _______________________________________________________ Max. Ø of crown gear 400 mm Adjustment of pinion spindle 160 / 250 mm Adjustment of crown gear spindle 115 / 265 mm Additional movements: Axial / distance / vertical, approx. + / - 2 mm Automatic tooth clearance 0 - 0.6 mm Module 1 - 10 Axial offset, up / down, each 50 mm (= axial offset travel from middle position) Bore hole of driving spindle 100 taper Bore hole of driven spindle 60 taper 6 spindle speeds 900 - 1,800 rpm Total electrical load 12 kW - 380 V - 50 Hz Weight 4,200 kg Accessories / Special Features * Hydraulic workpiece clamping for both spindles. * Automatic lapping process. Following function can be preset: Clockwise / anticlockwise movement, lapping torque, pulling and pushing movement, 4 lapping programs, etc. * Protective hood for crown gears with a diameter up to 400 mm, with automatic closing mechanism. * Separate switch cabinet. * Separate hydraulic unit, etc. Price, ex stock EUR 29,500.-- The lapping process employed by this machine greatly improves the running performance of bevel gear pairs. Pinions and gears are meshed by up to three additional movements (axial, radial and vertical) which are controlled by cams. Tooth flanks are smoothed with the help of lapping medium, and contact patterns are corrected as necessary.
            max. wheel diameter 400 mm
            gear width NA mm
            max. module 1
            min. module 10
            total power requirement 12 kW
            weight of the machine ca. 4,2 t
            Description :
            K L I N G E L N B E R G (Germany)
            Automatic Bevel Gear Lapping Machine
            Model LKR 400 A 100 Year 1974/1998 Serial No. 1890
            Partially reconditioned and electrically modernized in 1998 by
            Welter Company
            _______________________________________________________
            Max. Ø of crown gear 400 mm
            Adjustment of pinion spindle 160 / 250 mm
            Adjustment of crown gear spindle 115 / 265 mm

            Additional movements:
            Axial / distance / vertical, approx. + / - 2 mm
            Automatic tooth clearance 0 - 0.6 mm
            Module 1 - 10
            Axial offset, up / down, each 50 mm
            (= axial offset travel from middle position)

            Bore hole of driving spindle 100 taper
            Bore hole of driven spindle 60 taper
            6 spindle speeds 900 - 1,800 rpm

            Total electrical load 12 kW - 380 V - 50 Hz
            Weight 4,200 kg

            Accessories / Special Features
            * Hydraulic workpiece clamping for both spindles.
            * Automatic lapping process. Following function can be preset: Clockwise / anticlockwise movement, lapping torque, pulling and pushing movement, 4 lapping programs, etc.
            * Protective hood for crown gears with a diameter up to 400 mm, with automatic closing mechanism.
            * Separate switch cabinet. * Separate hydraulic unit, etc.

            Price, ex stock EUR 29,500.--

            The lapping process employed by this machine greatly improves the running performance of bevel gear pairs. Pinions and gears are meshed by up to three additional movements (axial, radial and vertical) which are controlled by cams. Tooth flanks are smoothed with the help of lapping medium, and contact patterns are corrected as necessary.




        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Bevel Gear Shaping Machine

          used Gear cutting machines Bevel Gear Shaping Machine HEIDENREICH & HARBECK 60 HG


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-24057 · Bevel Gear Shaping Machine

          HEIDENREICH & HARBECK - 60 HG - - 1958 -

          Technical details
          min/max. wheel diameter at ratio = 1:10 25 / 600 mm︱gear width 90 mm︱module max. spur toothing 2 -9 Modul︱min/max. pitch cone angle 5 - 90 °︱weight of the machine ca. 5,8 t︱Overall size 3,8 x 2,3 x 1,6 mm︱max. ram stroke 0 - 100 mm︱no. of strokes 63 - 400 /min Stück︱total power requirement 7,2 kW︱
          Machine condition very good compl. standard accessories with adjustment tools, change gears and measure tools video link: http://www.youtube.com/watch?v=oMI-DRWWDLA&feature=youtu.be
            min/max. wheel diameter at ratio. 25 / 600 mm
            gear width 90 mm
            module max. spur toothing 2 -9 Modul
            min/max. pitch cone angle 5 - 90 °
            weight of the machine ca. 5,8 t
            Overall size 3,8 x 2,3 x 1,6 mm
            max. ram stroke 0 - 100 mm
            no. of strokes 63 - 400 /min Stück
            total power requirement 7,2 kW
            Description :
            Machine condition very good
            compl. standard accessories with adjustment tools, change gears and measure tools
            video link:
            http://www.youtube.com/watch?v=oMI-DRWWDLA&feature=youtu.be


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Shaping Machine H & H 60 HS 3


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2061 · Bevel Gear Shaping Machine

          H & H - 60 HS 3 - - -

          Technical details
          max. wheel diameter 25 / 600 mm︱gear width 0 -90 mm︱max. module 10 ︱min. module 1,5 ︱min/max. pitch cone angle 5 - 90 °︱tooth length 90 mm︱stroke 0 - 100 mm︱total power requirement 7,5 kW︱weight of the machine ca. 6,1 t︱dimensions of the machine ca. 3,0 x 2,4 x 1,8 m︱
          Equipment: Change gears, planer knives, setting devices, clamping devices, ...
            max. wheel diameter 25 / 600 mm
            gear width 0 -90 mm
            max. module 10
            min. module 1,5
            min/max. pitch cone angle 5 - 90 °
            tooth length 90 mm
            stroke 0 - 100 mm
            total power requirement 7,5 kW
            weight of the machine ca. 6,1 t
            dimensions of the machine ca. 3,0 x 2,4 x 1,8 m
            Description :
            Equipment:
            Change gears, planer knives, setting devices, clamping devices, ...


        • Emuk Maschinenhandel GmbH
        • Siemensstrasse 24
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact

          Bevel Gear Testing Machine

          used Gear cutting machines Bevel Gear Testing Machine OERLIKON T50


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-18006 · Bevel Gear Testing Machine

          OERLIKON - T50 - - 2001 -

          Technical details
          max. wheel diameter 400/500 mm︱CNC-Control GE FANUC Series 160i-M ︱pinion diameter - max. 400 mm︱crown gear diamter max. 500 mm︱x-axis +/- 70 mm︱y-axis 200 mm︱z-axis 200 mm︱axis angle 90 Grad︱speeds: R 0 - 3000 / T 0 - 5000 1/min︱rated current 30 kVA︱weight of the machine ca. 6,2 t︱dimensions of the machine ca. 3,2 x 2,5 x 2,3 m︱
          The Oerlikon T50 is a 3-axis CNC testing machine for fully automatic hard and soft testing of spiral and hypoid bevel gears with an axle angle of 90° Bevel gear analysis ROTEC T50 GA2 Color unit company Binks
            max. wheel diameter 400/500 mm
            CNC-Control GE FANUC Series 160i-M
            pinion diameter - max. 400 mm
            crown gear diamter max. 500 mm
            x-axis +/- 70 mm
            y-axis 200 mm
            z-axis 200 mm
            axis angle 90 Grad
            speeds: R 0 - 3000 / T 0 - 5000 1/min
            rated current 30 kVA
            weight of the machine ca. 6,2 t
            dimensions of the machine ca. 3,2 x 2,5 x 2,3 m
            Description :
            The Oerlikon T50 is a 3-axis CNC testing machine for fully automatic
            hard and soft testing of spiral and hypoid bevel gears with an axle angle
            of 90°
            Bevel gear analysis ROTEC T50 GA2
            Color unit company Binks


        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Testing Machine GLEASON 513


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-385316 · Bevel Gear Testing Machine

          GLEASON - 513 - - 1975 -

          Technical details
          max. wheel diameter 400 mm︱gear width 0 mm︱module ︱pinion diameter - max. 254 mm︱axial cross angle 90 °︱total power requirement 15 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          G L E A S O N (USA) Hypoid Spiral Bevel Gear Running Testing Machine Model 513 TESTER, Year 1975, Serial No. 721607 This machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and the pinion spindle is horizontal. The pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting position whereby the gear is "loaded" with a preset torque. The axial pinion position can be adjusted until the quietest meshing position of the traction flank is found. Likewise, the thrust flank can be tested during the return run. Marking compound is sprayed on both sides of the teeth so the flank contact pattern can be seen. Working cycles, as well as the positioning in the tooth gap, are automatic. The gear quality can be assessed by recording the harmonic frequencies, which are displayed on a separate monitor and which can be analyzed with a RHF Control. Machine can be used for soft testing of production parts, as well as for mating sets of hardened gears and pinions prior to lapping, and for final testing after lapping to select the optimum pinion mounting distance. Also ideal for lab work, processing, and quality control. Max. gear outside diameter, approx. 508 mm Max. pinion outside diameter, approx. 254 mm Axial cross angle 90 ° Offset of pinion spindle above/below gear spindle, max. 102 mm Diameter of taper hole, pinion spindle 99/95 mm Diameter of taper hole, gear spindle 56/55 mm Speeds of pinion spindle, infinitely variable 0 - 1,250 rpm Speeds of gear spindle, infinitely variable 0 - 1,250 rpm Spindle drive, approx. 5 / 7.5 kW Total electrical load, approx. 15 kW - 380 V - 50 Hz Accessories / Special Features * Large display for 1 / 2 / 3 harmonies, display for pinion distance, pinion speed, as well of gear torque in kg/torque, etc. * Hydraulic workpiece clamping. * Hydraulic slide clamping. * Tank for marking compound with mixer and pump, separate. * Separate switch cabinet. * Separate hydraulic unit. * Lots of spare parts, spare motors, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.
            max. wheel diameter 400 mm
            pinion diameter - max. 254 mm
            axial cross angle 90 °
            total power requirement 15 kW
            Description :
            G L E A S O N (USA)
            Hypoid Spiral Bevel Gear Running Testing Machine
            Model 513 TESTER, Year 1975, Serial No. 721607

            This machine is very suitable for precision production testing of spiral and
            hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and
            the pinion spindle is horizontal.
            The pinion cone distance can be adjusted while the machine is working in
            order to find the optimal mounting position whereby the gear is "loaded"
            with a preset torque.
            The axial pinion position can be adjusted until the quietest meshing position
            of the traction flank is found. Likewise, the thrust flank can be tested
            during the return run.
            Marking compound is sprayed on both sides of the teeth so the flank contact
            pattern can be seen. Working cycles, as well as the positioning in the
            tooth gap, are automatic. The gear quality can be assessed by recording the
            harmonic frequencies, which are displayed on a separate monitor and which
            can be analyzed with a RHF Control. Machine can be used for soft testing of
            production parts, as well as for mating sets of hardened gears and pinions
            prior to lapping, and for final testing after lapping to select the optimum
            pinion mounting distance. Also ideal for lab work, processing, and quality
            control.

            Max. gear outside diameter, approx. 508 mm
            Max. pinion outside diameter, approx. 254 mm
            Axial cross angle 90 °
            Offset of pinion spindle above/below gear spindle, max. 102 mm
            Diameter of taper hole, pinion spindle 99/95 mm
            Diameter of taper hole, gear spindle 56/55 mm
            Speeds of pinion spindle, infinitely variable 0 - 1,250 rpm
            Speeds of gear spindle, infinitely variable 0 - 1,250 rpm

            Spindle drive, approx. 5 / 7.5 kW
            Total electrical load, approx. 15 kW - 380 V - 50 Hz

            Accessories / Special Features
            * Large display for 1 / 2 / 3 harmonies, display for pinion distance,
            pinion speed, as well of gear torque in kg/torque, etc.
            * Hydraulic workpiece clamping. * Hydraulic slide clamping.
            * Tank for marking compound with mixer and pump, separate.
            * Separate switch cabinet. * Separate hydraulic unit.
            * Lots of spare parts, spare motors, etc.

            Condition : Good. Machine can soon be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.




        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact

          Chamfering and Deburring Machine

          used Gear cutting machines Chamfering and Deburring Machine HURTH ZK 200/1-TE CNC


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-341998b · Chamfering and Deburring Machine

          HURTH - ZK 200/1-TE CNC - - 1991 -

          Technical details
          max. wheel diameter 0 mm︱max. number of teeth 0 ︱max. module ︱min. module ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC controlled milling machine for synchronous rings
            Description :
            CNC controlled milling machine for synchronous rings


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Chamfering and Deburring Machine PRÄWEMA W 2 - 1 SYNCHROFORM


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-347971 · Chamfering and Deburring Machine

          PRÄWEMA - W 2 - 1 SYNCHROFORM - - 1991 -

          Technical details
          max. wheel diameter 400 mm︱max. number of teeth 150 ︱max. module 5 ︱total power requirement 16 kW︱weight of the machine ca. 10 t︱
          Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. * 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.
            max. wheel diameter 400 mm
            max. number of teeth 150
            max. module 5
            total power requirement 16 kW
            weight of the machine ca. 10 t
            Description :
            Workpiece Ø, min./max. 30 - 400 mm
            Number of teeth 6 - 150
            Module range, max. 5

            Tool holder shaft Ø SK 30 / 20
            Tool speeds 4,000 rpm
            Spindle drive max. infinitely variable 1.8 kW
            Feeds, longitudinal and cross 0.001 - 12 m/min
            Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm
            Workspindle slide 400 mm
            Tool speed, max. 3,000 rpm
            Tool holder SK 30

            Total electrical load, approx. 16 kW - 380 V - 50 Hz
            Weight, approx. 10,000 kg

            Accessories / Special Features
            * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process.
            * 2 workspindle units, left and right, which can be set at any angle.
            * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide.
            * L and O Axes for milling spindle. C Axis for workspindle rotation.
            * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control.
            * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air.
            * Coolant equipment with chip conveyor.
            * Noise protection cabin. * Central lubrication.
            * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc.


            The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity.

            Condition : Good to very good. Machine can soon be inspected under power.
            Delivery : Ex stock, as inspected
            Payment : Net, after conclusion of contract

            Thank you for your interest. We always have a good selection of gear machines available on stock.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Gear cutting machines Chamfering and Deburring Machine HURTH ZK 7


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-555393 · Chamfering and Deburring Machine

          HURTH - ZK 7 - - 1975 -

          Technical details
          max. wheel diameter 280 mm︱max. number of teeth 100 ︱max. module 6 ︱min. module 1 ︱total power requirement 6 kW︱weight of the machine ca. 2500 kg︱dimensions of the machine ca. m︱
            max. wheel diameter 280 mm
            max. number of teeth 100
            max. module 6
            min. module 1
            total power requirement 6 kW
            weight of the machine ca. 2500 kg


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •