European network of stockholding machinery dealers
What search term would you use to search for this machine?
Band Saw
BERG & SCHMID - Vollautomat GBS 305 VA-I CNC
A + B Werkzeuge Maschinen Handels GmbH
Rottweg 17 · 48683 - Ahaus(0049)-2561-9384-71
(0049)-2561-9384-36
www.ab-maschinen.de
Machine data
Machine photos
Document
Keine weiteren Dokumente vorhandenTechnical details
| cutting diameter | 305 mm |
| capacity 90 degrees: flat | 350 x 200 mm |
| capacity 90 degrees: square | 260 mm |
| capacity 45 degrees: flat | 230 x 200 mm |
| capacity 45 degrees: round | 250 mm |
| capacity 45 degrees: square | 230 mm |
| capacity 60 degrees: flat | 170 x 100 mm |
| capacity 60 degrees: square | 155 mm |
| capacity 60 degrees: round | 175 mm |
| turning speed range: | 18 – 110 m/min |
| dimensions of saw-band | 3.375 x 27 x 0,90 mm |
| work height max. | 880 mm |
| total power requirement | 1,5 / 1,8 kW |
| weight of the machine ca. | 840 kg |
| dimensions of the machine ca. | 1.900 x 1.850 x 2000 mm |
Videos
Keine Video-Dateien vorhandenAdditional information
Furnishing :
- miter left 45 ° automatic operation
- miter left 60 ° semi-automatic operation (cuts without programming)
- Material height sensor (automatic cut start detection)
- Frame and gear from a single source
- very quiet cut and very low vibration
- Chip tray can be removed (disinfection)
- Shockproof and ergonomic control panel with oil-proof EPDM cover
- Easy access to the saw, material and feed unit
- Foldable safety cover
- Fine adjustment of the feed rate
- semi-automatic cut
BERG SCHMID CNC control:
- Possibility to enter various parameters such as number of pieces and material
length, automatic calculation of the cutting channel
- for 10 different sawing programs, with 99 sub-programs
- for different lengths and quantities
e.g. 1x cutting program with various cut lengths
- Incremental feed with automatic length compensation
- Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece
length 170 mm
- Single stroke - feed slide 500 mm
Info from the manufacturer:
When installing this saw in the network with
Residual current circuit breaker (FI) should
this universal current sensitive and not below 300 mA
be executed.
- miter left 45 ° automatic operation
- miter left 60 ° semi-automatic operation (cuts without programming)
- Material height sensor (automatic cut start detection)
- Frame and gear from a single source
- very quiet cut and very low vibration
- Chip tray can be removed (disinfection)
- Shockproof and ergonomic control panel with oil-proof EPDM cover
- Easy access to the saw, material and feed unit
- Foldable safety cover
- Fine adjustment of the feed rate
- semi-automatic cut
BERG SCHMID CNC control:
- Possibility to enter various parameters such as number of pieces and material
length, automatic calculation of the cutting channel
- for 10 different sawing programs, with 99 sub-programs
- for different lengths and quantities
e.g. 1x cutting program with various cut lengths
- Incremental feed with automatic length compensation
- Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece
length 170 mm
- Single stroke - feed slide 500 mm
Info from the manufacturer:
When installing this saw in the network with
Residual current circuit breaker (FI) should
this universal current sensitive and not below 300 mA
be executed.
On this page you will find a an offer on a used Band Saw of type GBS 305 VA-I CNC of the company BERG & SCHMID - Vollautomat with year of construction and with stock no.: 1008-8174061. The machine is manufactured by the company A + B Werkzeuge Maschinen Handels GmbH from 48683 Ahaus offered. The delivery time / delivery status for this machine is: by appointment For more information, please refer to the details listed.
Documents & Videos
Keine weiteren Dokumente vorhanden
Keine Video-Dateien vorhanden
Machine
Band Saw
